TE700 Workstation grounding monitor

04-0201-20100DT3 Universal stand for wrist strap and shoe grounding tester
2021.04.23.
DCC01 Dual conductor coiled grounding cord
2021.04.23.

TE700 Workstation grounding monitor

Stationary electrical and workstation monitoring of both personnel and work surface grounding systems. Can be used in place of individual checks.

Kérje ajánlatunkat!

▪  Real-time monitoring of the safety resistor
▪  Monitors 1 or 2 colleagues and a workstation simultaneously
▪  Allows simultaneous, full and complete testing of dual conductor wrist straps and cables, as well as work surfaces
▪  Audible and visual warning
▪  Time saving: replaces scheduled quality controls of products
▪  TE72 Remote input jack included in delivery (also available separately)
▪  CE Certificate

Properties

▪  Dimensions:
TE700 17 cm x 8 cm x 4 cm
TE72 10 cm x 2 cm x 2 cm
▪  Power supply:
Input 230 V / AC @ 50 Hz
Output 25 V / DC @ 200 mA
▪  Connector:
Outer diameter 5.5 mm
Inner diameter 2.1 mm
Connector length 9.5 mm (Internal negative pole)
▪  Operating temperature: approx. 10 ° C to 50 ° C (max. 75% RH)
▪  Certification: CE
Electrical

Properties

▪  Resistance test range: Upper limit 35 MΩ
▪  Test voltage: 16 V
▪  Test current: <3 µA
We recommend a yearly system calibration!
Details
TE700 visual signals:
LED operator 1 Lights up green when coil cord is plugged into jack 1 of the TE72.
LED operator 2 Lights up green when coil cord is plugged into jack 2 of the TE72.
LED wrist strap Alert signal lights up, as soon as one of the connected dual conductor wrist straps or coil cords is defect, if there is no firm wrist strap to skin contact, or if a cord is disconnected.
Depending on the failure, the LED “wrist strap high” or “low” will light up red.
LED table top If the connection to a table mat is faulty, the LED “table top” will light up red.
No LED lights up when the table mats are connected correctly.
Scope of Delivery
▪  TE700 Workplace monitor with operating instructions
▪  TE72 Remote input jack with 2 connectors
▪  Connecting cable TE700 to TE72
▪  Connecting cable TE700 to work surface
▪  Connecting cable TE700 to grounding point
▪  Power plug
▪  Manual
(Required accessories: Dual conductor wrist strap, dual conductor coiled grounding cord, grounding plug, if necessary)

Order information

▪  940000 000700 TE700 Workstation grounding monitor
▪  940000 000072 TE72 Remote input jack (spare part)

Print Friendly, PDF & Email